WE9 Different Boots SHOES + HIGH CUT STYLE Pato_Lucas18
![[Image: haDQQwq.jpeg]](https://i.imgur.com/haDQQwq.jpeg)
The original work was done for PES6 by Pato_Lucas18 (different boots) and Icarospes (high cut model) -- I simply adapted it to WE9
TUTORIAL
--------
Extract the kit models you want to modify, they are inside 0_text and start from unknow_00782.str (model 0)
NOTE: Always use the original model files! If you modify it to have different boots, but later want to also have it high cut, don't use the modified model, but reuse the original one and redo the procedure from scratch!
Download Pato_Lucas's model extractor from here, bottom of first post: http://www.foro.pesretro.net/showthread.php?tid=9812
Open Pato's zip, inside the folder "zip-it-back" execute "ZlibTool.exe", and export the unknow_XXXXX.str file
From the same zip, extract "extract3d_v_1.exe", "Make Input.exe" and "rebin_v1.exe" where you extracted and exported the unknow_XXXXX.str file
Execute "Make Input.exe", click "Open File..." and select the unknow_XXXXX.str_000 you exported
Once loaded, select only parts 21 (which is the boots) and 29 (the studs)*, and click "Save input.txt", it will say "OK", after that you can close it
* The studs are parts 22 AND 40 for Pato_Lucas18's PES6-to-PES5 kits (which use the original model 8 as base), but the procedure is the same, you just have to do it twice for the last 2 parts inside "all.fef"
Now execute "extract3d_v_1.exe", a window will appear, wait for it to finish and close itself
A file named "all.fef" will be created, open it with a text editor
After a few lines you will see a list of numbers, like this -> -51.004639 14.647840 -33.723042 0.001950 0.324220 0xFFFFFFFF
Select them all until they finish and another list of numbers begins, and copy them
Now open the Excel spreadsheet converter you want to use, go to the "Boots (Part 21)" sheet and paste the numbers where it tells you to
Now copy the converted numbers in the right yellowish column, and replace the numbers inside "all.fef", being watchful of not leaving any empty lines in between
Inside "all.fef", you'll see that if you continue down, you'll notice that another set of numbers like the ones above will start -- that is the studs part
Do the same for these other numbers, this time inside the "Studs (Part 29)" sheet
Once also these numbers have been converted and replace inside "all.fef", simply save and close it
Now execute "rebin_v1.exe" and wait for its window to close, it will create a new "new_unknow_XXXXX.str_000" file -- rename it to "unknow_XXXXX.str_000", replacing the old one
Now, inside Pato's zip, open "ZlibTool.exe" again and import the new "unknow_XXXXX.str_000"
Now the modified "unknow_XXXXX.str" model is ready to be used!
FOR HIGH CUT MODEL
------------------
Open the boot texture you want, then use either the Photoshop Action (.atn) or EXE Droplet whether you want to make it a high cut or low cut model
Simply double click the .atn file, and the Actions will be permanently added to your Photoshop
Otherwise, extract the EXE you want, and drag and drop the boot texture directly on top of it -- Photoshop will open itself if not open already, and will automatically convert the texture (it will also create a log file for any possible errors)
This is useful if some players in your team have high cut boots but the others don't, because since the boot model is the same for all players in the team, this way you can have different players have either high or low cut boots, just by changing the texture
FOR DIFFERENT BOOTS
-------------------
New mapping: top = right shoe, bottom = left shoe -> join textures then resize to 170x256
You can convert single, standard boots to double ones for the new model with Pato's "2 Boots.EXE" Droplet, if you want to quickly adapt the other non-different boots for the team(s) that have players with different ones, so you'll have players both with and without different boots in the same team, with no issues
If using both boot models, first edit the texture for the high cut model, and only later join and resize them, or use the "2 Boots.EXE" Droplet
Referencia::
- evoweb.uk
[download] Download [/download] ---> WE9 Different Boots SHOES + HIGH CUT STYLE
Winning Eleven 9 - Pro Evolution Soccer 5 (PS2-XBOX)
![[Image: winningeleven-pes-wikipedia-12.jpg]](https://winningeleven-games.com/uploads/imagenes/winningeleven-pes-wikipedia-12.jpg)
Pro Evolution Soccer 5 (Winning Eleven 9 en su versión japonesa) es el quinto título de la saga. Esta entrega respecto a sus dos versiones anteriores contiene algunos cambios, como por ejemplo: un mayor realismo en el comportamiento del balón, jugadores mas humanos, pequeñas mejoras en la IA o más licencias respecto a sus antecesores.
Referencia::
- foro.pesretro.net
:alter_mann:
:big_boss:
![[Image: haDQQwq.jpeg]](https://i.imgur.com/haDQQwq.jpeg)
The original work was done for PES6 by Pato_Lucas18 (different boots) and Icarospes (high cut model) -- I simply adapted it to WE9
TUTORIAL
--------
Extract the kit models you want to modify, they are inside 0_text and start from unknow_00782.str (model 0)
NOTE: Always use the original model files! If you modify it to have different boots, but later want to also have it high cut, don't use the modified model, but reuse the original one and redo the procedure from scratch!
Download Pato_Lucas's model extractor from here, bottom of first post: http://www.foro.pesretro.net/showthread.php?tid=9812
Open Pato's zip, inside the folder "zip-it-back" execute "ZlibTool.exe", and export the unknow_XXXXX.str file
From the same zip, extract "extract3d_v_1.exe", "Make Input.exe" and "rebin_v1.exe" where you extracted and exported the unknow_XXXXX.str file
Execute "Make Input.exe", click "Open File..." and select the unknow_XXXXX.str_000 you exported
Once loaded, select only parts 21 (which is the boots) and 29 (the studs)*, and click "Save input.txt", it will say "OK", after that you can close it
* The studs are parts 22 AND 40 for Pato_Lucas18's PES6-to-PES5 kits (which use the original model 8 as base), but the procedure is the same, you just have to do it twice for the last 2 parts inside "all.fef"
Now execute "extract3d_v_1.exe", a window will appear, wait for it to finish and close itself
A file named "all.fef" will be created, open it with a text editor
After a few lines you will see a list of numbers, like this -> -51.004639 14.647840 -33.723042 0.001950 0.324220 0xFFFFFFFF
Select them all until they finish and another list of numbers begins, and copy them
Now open the Excel spreadsheet converter you want to use, go to the "Boots (Part 21)" sheet and paste the numbers where it tells you to
Now copy the converted numbers in the right yellowish column, and replace the numbers inside "all.fef", being watchful of not leaving any empty lines in between
Inside "all.fef", you'll see that if you continue down, you'll notice that another set of numbers like the ones above will start -- that is the studs part
Do the same for these other numbers, this time inside the "Studs (Part 29)" sheet
Once also these numbers have been converted and replace inside "all.fef", simply save and close it
Now execute "rebin_v1.exe" and wait for its window to close, it will create a new "new_unknow_XXXXX.str_000" file -- rename it to "unknow_XXXXX.str_000", replacing the old one
Now, inside Pato's zip, open "ZlibTool.exe" again and import the new "unknow_XXXXX.str_000"
Now the modified "unknow_XXXXX.str" model is ready to be used!
FOR HIGH CUT MODEL
------------------
Open the boot texture you want, then use either the Photoshop Action (.atn) or EXE Droplet whether you want to make it a high cut or low cut model
Simply double click the .atn file, and the Actions will be permanently added to your Photoshop
Otherwise, extract the EXE you want, and drag and drop the boot texture directly on top of it -- Photoshop will open itself if not open already, and will automatically convert the texture (it will also create a log file for any possible errors)
This is useful if some players in your team have high cut boots but the others don't, because since the boot model is the same for all players in the team, this way you can have different players have either high or low cut boots, just by changing the texture
FOR DIFFERENT BOOTS
-------------------
New mapping: top = right shoe, bottom = left shoe -> join textures then resize to 170x256
You can convert single, standard boots to double ones for the new model with Pato's "2 Boots.EXE" Droplet, if you want to quickly adapt the other non-different boots for the team(s) that have players with different ones, so you'll have players both with and without different boots in the same team, with no issues
If using both boot models, first edit the texture for the high cut model, and only later join and resize them, or use the "2 Boots.EXE" Droplet
Referencia::
- evoweb.uk
[download] Download [/download] ---> WE9 Different Boots SHOES + HIGH CUT STYLE
Winning Eleven 9 - Pro Evolution Soccer 5 (PS2-XBOX)
![[Image: winningeleven-pes-wikipedia-12.jpg]](https://winningeleven-games.com/uploads/imagenes/winningeleven-pes-wikipedia-12.jpg)
Pro Evolution Soccer 5 (Winning Eleven 9 en su versión japonesa) es el quinto título de la saga. Esta entrega respecto a sus dos versiones anteriores contiene algunos cambios, como por ejemplo: un mayor realismo en el comportamiento del balón, jugadores mas humanos, pequeñas mejoras en la IA o más licencias respecto a sus antecesores.
Referencia::
- foro.pesretro.net
:alter_mann:
:big_boss:
Winning Eleven & ProEvolutionSoccer & FIFA EA Sports |Option Files|
