Winning Eleven Pro Evolution Soccer

Full Version: [TUTORIAL] Transferring an Option File xbox360 by USB!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hi guys. I don't know if you already know how to work it yet, but I know the update is new on the xbox and anxiety is high to transfer files from your pc to the xbox using USB. Well I know how to do it! Here is how:


before doing the below make sure you have formated your USB to Xbox 360 on the console and copied over all your PES games save file. I'd copy it and not move it as you may lose the saves totally if you do it wrong!

1- Download Slashr's USB Xplorer from here
<!-- m --><a class="postlink" href="http://www.se7ensins.com/forums/topic/190542-release-usb-hdd-xplorer/">http://www.se7ensins.com/forums/topic/1 ... d-xplorer/</a><!-- m -->

Mirror: <!-- m --><a class="postlink" href="http://www.megaupload.com/?d=IG2U0135">http://www.megaupload.com/?d=IG2U0135</a><!-- m -->

2- Extract it from the zip file to your desktop.

3- Download the option file of your choosing from PESGaming.com, I have tested both D&C Pro 10 Elite Tapas FULL ENGLISH and JON'S Option File and both worked with this method.

4- Extract the folder to your desktop.

5- Open up USB Xplorer, you should get the below screen:

[Image: 16iy0ef.jpg]

6- Press file and Open Device, you should get something come up in the white box that says "0. {dir}content". Double click this and then you should see a folder called something like {dir}E00007FB5AB1185FF. yours wont be exactly the same but it will be similar.

7- Double click that folder and then you should see another folder called something like {dir}4b4e0801. It is possible you will have more than one folder so try one if the data i mention below is not there it should be in the other.

8- Once double clicking on that folder you will have a folder called {dir}00000001. Double click again.

9- This should then display all of your current PES files. It should look alike below:

[Image: vi6gw.jpg]

10- Delete your current PES2010_EDIT.bin file and any files named something like PES2010_UNIFORM001.bin.

11- Open up the folder of the option file you downloaded from PESGaming.com, you should bin files called PES2010_EDIT.bin and PES2010_UNIFORM001.bin upto something like PES2010_UNIFORM200.bin. This is the boring bit. Copy each .bin over by pressing Inject on the USB Xplorer and opening the file. You have to do it single file by single file, which took me about 10 minutes to do.

12- Once you have done that in USB Xplorer your USB's data should have a long list of all the files you injected into the USB. At this point what I did was copy the folder i downloaded from PESGaming to another location to back it up. Then I deleted every file in the original folder to make sure they were not in use, this confirms they have been transferred to the USB.

13- Remove your USB close USB Xplorer, then insert the USB again and re open the Xplorer. Follow steps 5 to 9 again and check the files you injected still show up, just to confirm they are all on the USB.

14- Remove the USB and insert into your Xbox 360. Boot up PES2010 and when it gets to the screen you choose your memory, choose the USB. go to exhibition and check all the logos are there. NOTE: Shirt sponsors wont show up yet for some reason. But they will in a moment...

15- If it looks okay go back to the dashboard of your xbox and navigate to memory. copy over the PES2010 game file from your USB to the Xbox 360's hard drive. Then boot PES2010 again. Your shirts should now all have sponsors on and look like the real shirts your favourite teams play in!

fuente: pesgaming
Using the 360 USB HDD Xplorer Tool

Introduction
So, as we all know, April 6th brought us a new system update. This update brought us USB support so we can use any flash drive (1GB to 16GB) as a Memory Unit. Well, we couldn’t do much with the files on it, but thanks to our very own Slashr, we now can do what you can pretty much do with a Transfer Cable. (Maybe not everything though!)

First of all, if you haven’t already, go download the latest release of Slashr’s program. I’ll also explain how to format your flash drive for use with the Xbox 360 just in case.

<!-- m --><a class="postlink" href="http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar">http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar</a><!-- m -->

Now that you have that downloaded we can start the tutorial.

Things you’ll need:

* 360 USB HDD Xplorer (See Link Above).
* Flash Drive – 1GB to 16GB in size and formatted for the Xbox 360.

Once you have the program extracted from the WinRAR archive, go ahead and run USBXTAFGUI.exe. Here is the program once it is loaded.

[Image: 67tk0g.png]

Pretty simple program. Now, the next part is fairly simple. Choose “File”, then “Open Device”. Once you do this, it should look something like this.

[Image: 2l8w00x.png]

Go ahead and choose the only option there by double clicking it. That will bring you to a list of items all marked with {dir} at the beginning. This means those are directories. (Mine may look different, and if it does let me know and I can help you out). List will looking something like this. (Removed my profile ID, the other is some offline one for tutorial purposes).

[Image: t06r0i.png]

Basically, these are you saves, profiles, and any content you moved/copied to the device. Each one contains files used for various modding purposes. So, I’ll detail what I can in here for extracting/injecting a file


Setting Up A Flash Drive For The Xbox 360


In this section, I’ll tell you how to set up a flash drive for the Xbox 360.

First, go ahead and turn on your console. Plug in your flash drive.
Remember, 1GB minimum. Now, head over the your console settings area and go to Memory.

You’ll a “USB Device” or something along those lines, and select it. Choose “Configure” if you want to use the entire device. It’ll run a test, and if it passes it’ll format it for the Xbox 360.

You have just successfully created your USB Memory Unit.

I’ve heard that SanDisk’s drives are great. I use a 4GB Cruzer and it runs flawlessly. I recommend one.



Extracting and Injecting a Profile


Alright, I’ll use an offline account for this. First, go ahead and open the program and load up your device. Then, go to {dir}content -> {dir}E000XXXXXXXXXXXX (The X’s are where your profile ID will be). It’ll look like this:

[Image: j5wor5.png]

Go ahead and do this.

{dir}E000XXXXXXXXXXXX -> {dir}FFFE07D1 -> {dir}00010000. Then, at the end should be a file reading E000XXXXXXXXXXXX. It’ll look like this:

[Image: xbhbps.png]

Now, go ahead and hit the “Extract” button. It’ll bring up a save as window, and you can choose where to save it. I recommend saving the the desktop. Leave the file name AS IS! This is required when you inject the profile later. Once you have a location for it, hit Save. It won’t have a file extension, but don’t worry that is normal.

Make sure it worked properly and try to load it into a program like Modio or something similar.

Now, once you mod your profile or do whatever it is you want to do, make sure you’ve done everything right for it.
Now, assuming you’ve left the 360 USB program open, go ahead and delete the file still on there. The same one you extracted earlier. It’ll show nothing on the program but DON’T close it.

Inject your profile. Do so by clicking “inject” and choosing your profile you saved earlier.

Now, plug it in to your Xbox 360 and see if it worked! If done right, you should see it and be able to sign in to the profile.

There you go! You have just successfully extracted and injected your profile.
comandante Wrote: Using the 360 USB HDD Xplorer Tool

Introduction
So, as we all know, April 6th brought us a new system update. This update brought us USB support so we can use any flash drive (1GB to 16GB) as a Memory Unit. Well, we couldn’t do much with the files on it, but thanks to our very own Slashr, we now can do what you can pretty much do with a Transfer Cable. (Maybe not everything though!)

First of all, if you haven’t already, go download the latest release of Slashr’s program. I’ll also explain how to format your flash drive for use with the Xbox 360 just in case.

<!-- m --><a class="postlink" href="http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar">http://halo.gruntmods.com/Files/Xtaf_Release_Gui_.rar</a><!-- m -->

Now that you have that downloaded we can start the tutorial.

Things you’ll need:

* 360 USB HDD Xplorer (See Link Above).
* Flash Drive – 1GB to 16GB in size and formatted for the Xbox 360.

Once you have the program extracted from the WinRAR archive, go ahead and run USBXTAFGUI.exe. Here is the program once it is loaded.

[Image: 67tk0g.png]

Pretty simple program. Now, the next part is fairly simple. Choose “File”, then “Open Device”. Once you do this, it should look something like this.

[Image: 2l8w00x.png]

Go ahead and choose the only option there by double clicking it. That will bring you to a list of items all marked with {dir} at the beginning. This means those are directories. (Mine may look different, and if it does let me know and I can help you out). List will looking something like this. (Removed my profile ID, the other is some offline one for tutorial purposes).

[Image: t06r0i.png]

Basically, these are you saves, profiles, and any content you moved/copied to the device. Each one contains files used for various modding purposes. So, I’ll detail what I can in here for extracting/injecting a file


Setting Up A Flash Drive For The Xbox 360


In this section, I’ll tell you how to set up a flash drive for the Xbox 360.

First, go ahead and turn on your console. Plug in your flash drive.
Remember, 1GB minimum. Now, head over the your console settings area and go to Memory.

You’ll a “USB Device” or something along those lines, and select it. Choose “Configure” if you want to use the entire device. It’ll run a test, and if it passes it’ll format it for the Xbox 360.

You have just successfully created your USB Memory Unit.

I’ve heard that SanDisk’s drives are great. I use a 4GB Cruzer and it runs flawlessly. I recommend one.



Extracting and Injecting a Profile


Alright, I’ll use an offline account for this. First, go ahead and open the program and load up your device. Then, go to {dir}content -> {dir}E000XXXXXXXXXXXX (The X’s are where your profile ID will be). It’ll look like this:

[Image: j5wor5.png]

Go ahead and do this.

{dir}E000XXXXXXXXXXXX -> {dir}FFFE07D1 -> {dir}00010000. Then, at the end should be a file reading E000XXXXXXXXXXXX. It’ll look like this:

[Image: xbhbps.png]

Now, go ahead and hit the “Extract” button. It’ll bring up a save as window, and you can choose where to save it. I recommend saving the the desktop. Leave the file name AS IS! This is required when you inject the profile later. Once you have a location for it, hit Save. It won’t have a file extension, but don’t worry that is normal.

Make sure it worked properly and try to load it into a program like Modio or something similar.

Now, once you mod your profile or do whatever it is you want to do, make sure you’ve done everything right for it.
Now, assuming you’ve left the 360 USB program open, go ahead and delete the file still on there. The same one you extracted earlier. It’ll show nothing on the program but DON’T close it.

Inject your profile. Do so by clicking “inject” and choosing your profile you saved earlier.

Now, plug it in to your Xbox 360 and see if it worked! If done right, you should see it and be able to sign in to the profile.

There you go! You have just successfully extracted and injected your profile.

Gracias Wink